How to Hang Dart Board on Cinder Block Wall – Complete Guide

Hanging a dartboard is easy if you know what you’re doing, but if you don’t, it can be frustrating. But don’t worry, there are a few easy ways to hang a dartboard on a cinder block wall, including using drywall anchors and cement anchors.

Choosing the best way to hang a dartboard is an important step in creating the perfect home environment for dart playing. There are many different methods you can use to hang a dartboard on a cinder block wall.

The easiest way is to use masonry screws, but if you don’t want to drill holes in your cinder block wall, you can also use liquid nails or command strips. The most important thing is that you choose a method that is easy and quick to install, and that you enjoy using.

Use Masonry Screws to Fit a Dartboard on Cinder Block Wall

You can use a hammer and chisel to cut out the holes for the bracket, but if you are planning on doing this a lot, you may want to invest in an electric drill.

This is where you will drill the holes for the screws. You are going to use these screws to mount your board to the wall. The holes should be spaced out so that when you put the screw in it is not as tight as the screw holding the board to the wall.

When drilling holes for screws in brick or stone, you should always make sure that you are using a mason bit. This will ensure that the screw will be flush with the surface of the wall. If you’re not sure what size to use, you can refer to this helpful guide from Home Depot.

The bit must be the correct size and depth to match the screws. A regular drill can be used for this process, but a hammer drill will make it easier. After you have your holes pre-drilled, line up the bracket with the holes, and use the drill to screw in the masonry screws.

If you have a wooden or plastic dartboard, you can secure it to the wall using masonry screws. To do this, you will need to drill a pilot hole for the screw into the wall. Then simply place the middle screw on the dartboard into the bracket and the screw will be tightened.

If it still does not fit, simply tighten or loosen the brackets you placed around the dartboard until it fits. If your frame has the main screw, you may have to adjust the main screw in the center of the board to make sure the board is straight.

Use Wall Plugs to Hang a Dartboard

The wall plug is important for holding the bracket in place as well as to help keep the screws from wiggling out of the cinder block wall. The wall plug also helps to prevent any damage to the surface of your wall.

You can use a drill or a screwdriver to do this, but I think it is easier and quicker to use a screw and a hammer. You just need to make sure you don’t go too far with the hammer. If you start hitting the screw head, you could break it off. It is also a good idea to use a longer screw than the one included with the bracket.

Liquid nail adhesive is a type of super glue that is often used to permanently adhere items together. This means that if you have an item that you want to hang on a wall, you can use liquid nail adhesive to secure it to the wall without worrying about it coming loose or peeling away. Liquid nail adhesive is often used to mount pictures to walls, as it doesn’t damage the surface of the wall.

Use Liquid Nails

You should allow the adhesive to dry completely before hanging your dartboard. The adhesive is designed to be tacky when first applied and will dry to a firm state in 24 hours. However, you can let the adhesive sit longer if necessary.

Darts are fun to play with, but you can also use them for practical purposes. Some people use them as a way to entertain friends and family. However, there are other reasons why you may want to use a dartboard, including playing darts with your friends.

You Can Use Command Strips to Hang the Dartboard

Command strips are the perfect way to hang a dartboard without damaging the wall. The best part is that they are easy to remove if you ever want to move your dartboard.

They can hold up to 16 pounds of weight, so you don’t have to worry about hanging too heavy of a dartboard.

I recommend using a combination of large and small command strips. They both offer advantages, so you may want to try out a few different sizes before deciding on which size you prefer.

The large command strips are usually used to hang heavy items such as a dartboard, while the smaller ones are great for hanging smaller items like a dart bag or a dartboard accessory.

Clean the Surfaces

If you have never used command strips before, I recommend doing this the first time you use them. Command strips are designed to be used on dry surfaces, so if you are new to using them you should do this first.

To do this, you should clean the surface with rubbing alcohol on a rag. Then, you can wipe down the back of the board as well as the wall where the board will hang. Ensure that the surfaces are not wet after this.

If you try to attach a command strip to a damp surface, you will find that they will not work as well. The reason is that the adhesive will not stick to the surface, and if you use them on a dry surface, you will have difficulty getting the paint to adhere to the paper.

Use Strips in pair

If you want to make sure your dartboard holds up, you’re going to need at least four strips to hold it up. Using more will ensure an even stronger hold. These strips come in pairs, using Velcro to attach to one another.

For a more secure grip, attach some vertically in the center of the board. Be sure to tighten each strip by pressing on it. Make sure that you don’t use the included bolts and screws. You don’t need to use them for this process.

Hang Your Dartboard

Dartboards can be expensive, so we offer a way to hang your own dartboard. We have you pair the strips together and then mount them to the wall to ensure that they will perfectly line up. We have a step-by-step video tutorial on how to hang your own dartboard.

When you’ve mounted the board to the wall, you can remove the Velcro binding from the board by pulling down on the strip, removing the tape, Put a small amount of pressure on each skin strip on the wall for about 30 seconds. Remove the tape after about an hour to ensure the adhesive bonds.

That’s it you are done and the board is all set. 

Conclusion

Hanging a dartboard is easy, but it can be a bit tricky if you aren’t familiar with command strips. I hope that you found this guide useful. 

Command strips are the perfect way to hang a dartboard without damaging the wall. The best part is that they are easy to remove if you ever want to move your dartboard.

I recommend using a combination of large and small command strips. They both offer advantages, so you may want to try out a few different sizes before deciding on which size you prefer.

Leave a Comment